Poulan 306 decal set Cox Use several very light coats

Use several very light coats and let them dry before a heavier protective coat is applied so that the sealer solvent does not wrinkle the decals

These stencils are made for a 16" bar measured from tip to saw

Self adhesive vinyl coated - Some restorers do not want to clear coat their saw after applying the decals

Firmly press transfer tape onto decals and peel off at a sharp angle to make sure that complete decal is removed from backing paper and is on the transfer tape

Poulan 306 decal set Cox Use several very light coatsAdd the decals back to your old saw, or, give that refurbishing project the final touch! Extensive research has gone into recreating these decals so that they are as close to original as possible. Full instructions for how to get a professional result from applying your decals are located in the Tuning and Repairs section of this site. Self adhesive vinyl coated Some restorers do not want to clear coat their saw after applying the decals. The vinyl